Your location: Home > NEWS > INDUSTRY NEWS
2026-01-31
In automotive LED lighting, brightness and beam pattern matter—but long-term reliability depends on the LED board. This guide compares aluminum MCPCB, copper MCPCB, FR-4, and FPC to help you choose.
MORE
2026-01-30
Work lights face chips, mud, salt spray, UV, and vibration. Learn why powder coating protects die-cast housings better than paint, plus process steps and limits.
MORE
2026-01-28
Polycarbonate (PC) is the go-to lens for LED light bars: tough, heat-ready, and clear. Here’s how coatings and textures make it automotive-grade.
MORE
2026-01-17
A practical guide to aux light housings in automotive lighting, covering stamping vs die casting, thermal paths, and why ADC12 aluminum is widely used for LED work lights.
MORE
2026-01-17
AL6063 is a common light bar housing material. This guide explains 6063 alloy basics, T5 vs T6 tempers, extrusion processing, and key alternatives.
MORE
2026-01-13
Most ditch lights are aimed wrong. Learn where to mount A-pillar/cowl pods, how to aim outward vs forward, and pick the right beam to avoid hood glare.
MORE
2026-01-12
Aux lights dim or flicker? Use this fast voltage-drop checklist to locate losses on the positive or ground path and fix the weak point in minutes.
MORE
TO BE SEEN ONE SECOND AHEAD
info@ogaled.com 
0086 135-6015-6476 
Room 505, 5th Floor, Jiangyun Building, No. 5 Heguang 2nd Cross Road, Tianhe District, Guangzhou